Automatic transmission: Before starting, you need to look around the vehicle to ensure safety, open the door and put the gear in the parking gear before starting. After stepping on the brake, press the button to start the vehicle. The vehicle will idle for 30 seconds and check whether all the indicator lights are normal. If all indicators are normal, put them in D gear to get ready to start.
The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake, turn the ignition key to the ignition gear, and start the engine. Step on the foot brake, release the handbrake, and pull the gear from N to D.
After the key is turned to the ON position, turn on the vehicle for a few seconds to complete the self-check. Then step on the brake and turn the key to start the vehicle (automatic transmission). After starting, the gear is put into D gear, slowly release the brake, and the vehicle moves forward.
How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
How to start the car is as follows: Automatic gear car: Automatic gear car needs to look around the vehicle, open the door after confirming safety, make sure that the gear is in front of the stop gear, step on the brake, and then press the button to start the button, the vehicle idles for about 30 seconds, check whether the indicator light on the dashboard is abnormal, and check that there is no difference. Always hang D gear and get ready to drive.
Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts.Step on the car clutch pedal. Put the car on the first gear. Step on the accelerator pedal of the car while half lifting the clutch pedal of the car. When the vehicle is shaking, release the handbrake of the car to complete the start.
1. Start smoothly and posture correctly. When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena. Only a smooth start can save fuel.
2. Adjust the seat after getting on the car. If our legs can't bend and stretch freely, it will be very tiring to control the throttle and clutch for a long time.
3. The starting method of the car is to step on the foot brake and pull the gear to N gear; turn the key, turn half a turn, and ignite the engine; wait for the engine to turn for about 1 minute, listen to the sound of the engine turning less, step on the foot brake, pull the gear to D gear, release the handbrake; master the steering wheel, slowly release the foot brake, and the car will automatically Start.
4. Dahan Automobile Circle 2023-10-26 · Contributed more than 329 answers Follow Expand All The correct order of starting the automatic transmission car The correct order of starting the automatic transmission car is as follows: Insert the car key into the keyhole and rotate it for half a lap. After the self-test is completed, the power start. Step on the brake and hang the D gear. Release the handbrake.
5. The upper and lower standards are the horizon at 1/3 of the upper part of the mirror, and the rearview mirror is subject to seeing the entire rear window.
6. Get ready to get on the car. Before getting on the car, you should patrol around the car, check the condition around the vehicle, and pay attention to whether there are obstacles under the car and around the car body. You can only get on the car after confirming that it is safe, because there are many blind spots in the car. If you observe through the rearview mirror, the field of view is very limited.
Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
After starting, the gear is put in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on it.After closing the device, start the engine, and then hang it into 1st gear. While slowly releasing the clutch, move your right foot from the brake pedal to the accelerator pedal, and refuel slightly. The throttle and clutch are used together, and the vehicle moves forward slowly.
Steps to start the car correctly: adjust the seat to your position after getting on, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.
1. Before getting in the car, check the surroundings of the vehicle to make sure that there are no small animals or children next to you, or whether there are iron nails, glass and other items that hinder the safety of the car. The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.
2. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
3. How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
Binance download APK-APP, download it now, new users will receive a novice gift pack.
Automatic transmission: Before starting, you need to look around the vehicle to ensure safety, open the door and put the gear in the parking gear before starting. After stepping on the brake, press the button to start the vehicle. The vehicle will idle for 30 seconds and check whether all the indicator lights are normal. If all indicators are normal, put them in D gear to get ready to start.
The correct order to start the car: turn the key to the connection position. Step on the foot brake and pull the gear from P gear to N gear. Release the foot brake, turn the ignition key to the ignition gear, and start the engine. Step on the foot brake, release the handbrake, and pull the gear from N to D.
After the key is turned to the ON position, turn on the vehicle for a few seconds to complete the self-check. Then step on the brake and turn the key to start the vehicle (automatic transmission). After starting, the gear is put into D gear, slowly release the brake, and the vehicle moves forward.
How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
How to start the car is as follows: Automatic gear car: Automatic gear car needs to look around the vehicle, open the door after confirming safety, make sure that the gear is in front of the stop gear, step on the brake, and then press the button to start the button, the vehicle idles for about 30 seconds, check whether the indicator light on the dashboard is abnormal, and check that there is no difference. Always hang D gear and get ready to drive.
Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts.Step on the car clutch pedal. Put the car on the first gear. Step on the accelerator pedal of the car while half lifting the clutch pedal of the car. When the vehicle is shaking, release the handbrake of the car to complete the start.
1. Start smoothly and posture correctly. When starting normally, it is required to be stable, safe and fuel-efficient. At the same time, you should have a correct driving posture, look far and near, always look at the road and traffic conditions ahead, and do not look down at the parts. When starting, try to avoid forward rush, shaking, shutdown, intermittent arching and other phenomena. Only a smooth start can save fuel.
2. Adjust the seat after getting on the car. If our legs can't bend and stretch freely, it will be very tiring to control the throttle and clutch for a long time.
3. The starting method of the car is to step on the foot brake and pull the gear to N gear; turn the key, turn half a turn, and ignite the engine; wait for the engine to turn for about 1 minute, listen to the sound of the engine turning less, step on the foot brake, pull the gear to D gear, release the handbrake; master the steering wheel, slowly release the foot brake, and the car will automatically Start.
4. Dahan Automobile Circle 2023-10-26 · Contributed more than 329 answers Follow Expand All The correct order of starting the automatic transmission car The correct order of starting the automatic transmission car is as follows: Insert the car key into the keyhole and rotate it for half a lap. After the self-test is completed, the power start. Step on the brake and hang the D gear. Release the handbrake.
5. The upper and lower standards are the horizon at 1/3 of the upper part of the mirror, and the rearview mirror is subject to seeing the entire rear window.
6. Get ready to get on the car. Before getting on the car, you should patrol around the car, check the condition around the vehicle, and pay attention to whether there are obstacles under the car and around the car body. You can only get on the car after confirming that it is safe, because there are many blind spots in the car. If you observe through the rearview mirror, the field of view is very limited.
Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
After starting, the gear is put in D gear, slowly release the brake, and the vehicle will move forward. If it is a manual transmission, you need to step on it.After closing the device, start the engine, and then hang it into 1st gear. While slowly releasing the clutch, move your right foot from the brake pedal to the accelerator pedal, and refuel slightly. The throttle and clutch are used together, and the vehicle moves forward slowly.
Steps to start the car correctly: adjust the seat to your position after getting on, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and hang the first gear. Turn on the left turn signal and honk the horn.
1. Before getting in the car, check the surroundings of the vehicle to make sure that there are no small animals or children next to you, or whether there are iron nails, glass and other items that hinder the safety of the car. The first thing to do when entering the car is to fasten your seat belt. The brake on the left and the accelerator on the right. This order must be remembered clearly.
2. Steps to start the car correctly: 1. After getting on the car, adjust the seat to suit you, and then fasten your seat belt. Start the car, then step on the clutch with your left foot and put it in first gear. Turn on the left turn signal and signal with the horn.
3. How to start the car is as follows: 1. Automatic gearshift car: The automatic gearshift car needs to look around the vehicle, open the door after confirming the safety, confirm that the gear is in front of the parking gear, step on the brake, and then press the button to start the button. The car will idle for about 30 seconds, check whether the indicator light on the dashboard is abnormal, check whether it is in D gear, and prepare to drive.
OKX Wallet app download for Android
442.98MB
Check
Binance login
388.64MB
Check
Binance download
729.66MB
Check
Binance US
472.56MB
Check
Binance exchange
933.19MB
Check
Binance Download for PC Windows 10
525.35MB
Check
Binance US
418.96MB
Check
Binance app download Play Store
531.71MB
Check
OKX Wallet apk download latest version
648.88MB
Check
Binance download iOS
137.22MB
Check
OKX Wallet
479.95MB
Check
Binance app download Play Store
299.45MB
Check
OKX Wallet app download for Android
548.94MB
Check
Binance US
744.15MB
Check
Okx app download
883.66MB
Check
Binance download
984.67MB
Check
Binance download
538.64MB
Check
OKX Wallet login
529.39MB
Check
Binance login
345.46MB
Check
Binance app download Play Store
217.58MB
Check
OKX Wallet app
472.99MB
Check
Binance Download for PC
594.72MB
Check
OKX Wallet apk download
997.42MB
Check
Binance Download for PC Windows 10
611.44MB
Check
Binance Download for PC Windows 10
641.71MB
Check
OKX Wallet download
766.57MB
Check
Binance app
929.46MB
Check
OKX Wallet download
914.67MB
Check
Binance app download Play Store
975.93MB
Check
Binance login
333.32MB
Check
OKX Wallet Sign up
377.15MB
Check
Binance US
479.25MB
Check
Binance exchange
775.29MB
Check
OKX Wallet Sign up
421.68MB
Check
Binance login App
864.95MB
Check
OKX Wallet Sign up
476.16MB
Check
Scan to install
Binance download APK to discover more
Netizen comments More
2407 及宾有鱼网
2025-01-23 04:48 recommend
2577 买空卖空网
2025-01-23 04:39 recommend
1491 十拷九棒网
2025-01-23 04:34 recommend
220 单刀赴会网
2025-01-23 03:08 recommend
1433 兔走乌飞网
2025-01-23 02:13 recommend