1. Solution steps: enter the system with PE. Display the hidden partition. Open the software Diskgenius, right-click on the hidden partition - cancel the hidden partition, add the drive letter - submit. Display hidden files.
2. There are several reasons for the infinite restart of ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the calculation. The machine will see if it can be repaired.
3Judging from the description of the problem, it should be a system problem. It is recommended to send the whole computer to the official after-sales service center of ASUS for comprehensive inspection by professional maintenance engineers to confirm the fault and necessary maintenance.
1, causing insufficient power supply, or leakage in the electrolytic capacitor at the output end, which will cause insufficient power supply when starting up, resulting in automatic restart of the computer, processing Method: Repair the host power supply or replace the power supply.
2. Use the system repair tool: In Windows 10, you can use the system repair tool to repair damaged system files. You can choose from the Windows 10 boot menu.Select "Troubleshooting", "Advanced Options" and "Command Prompt", and then enter the sfc /scannow command to start the system file check and repair tool.
3. Make sure that the hardware equipment of the computer is stablely connected, including memory, hard disk, graphics card, etc. All devices have been connected stably. You can plug and unplug the device again and restart the computer. When the computer starts, press the F8 key to enter the safe mode. In safe mode, disable unnecessary startup items and restart the computer.
The reason why the computer reinstall system has been restarting is that in the process of reinstalling the system with a USB flash drive, the main boot record (MBR) of the hard disk is destroyed, resulting in the inability to boot the system and repeated restarts.Due to the different hard disk mode, the system cannot be booted, resulting in repeated restarts.
It may be a problem with the setting of the BIOS. Enter the BIOS to restore the default settings or take out the battery of the motherboard and wait 5 minutes before installing it. Purpose: It is to restore the default value of BIOS settings and eliminate the phenomenon of automatic restart or shutdown of the heat dissipation preset of BIOS.
It is likely that the master boot record (MBR) of the hard disk is destroyed in the process of reinstalling the system with a USB flash drive, resulting in the inability to boot the system and repeated restarts.
What are the reasons for the automatic restart of the computer? How to prevent and control? In terms of software, the virus will also prompt the system to start automatically after 60 seconds when the shock wave virus attacks. The Trojan horse program remotely controls all the activities of your computer, including restarting your computer.Solution: Remove viruses, Trojan horses, or reinstall the system.
If the computer keeps restarting after restoring the factory settings, or cannot enter the safe mode by pressing the F8 key, here are some possible solutions: Check the startup order: enter the BIOS setting interface of the computer (usually press Del, FF12 and other keys to enter) and confirm the startup order. The order setting is correct.
Solving ideas: This problem occurs because the computer has its own genuine system, and there is a hidden partition on the computer's hard disk to save the system backup. When we activate Windows with the activation tool, the activation tool will write the "bootmgr" file in the system disk and hidden partition.
After restarting the computer, it can be used normally. My solution: Then enter the password interface and click the third icon in the lower right corner, select the high contrast, and then enter the password to enter the win10 system desktop.
In the process of installing the official version of Win10, when there is a blue screen and an infinite restart failure, we first need to disable the "graphics card driver".When the computer restarts indefinitely, press and hold the power button to force the shutdown, and then turn it on again to automatically enter the repair state.
Press the "F10" key and press the Enter key to confirm and save the BIOS configuration. Finally, you need to restart the computer.
Turn off the power first, then open the host box, unplug the power cable and data cable of the hard disk, and then plug it in after 2 minutes. Restart it and try to repair the operating system. Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, Press the power button for a long time after seeing the power-on screen.
There may be a problem with the system installation. You can replace the system to install the USB flash drive and try to reinstall the system.
Set it to "Enabled". Click F10 to save the settings, restart the system, and click ESC to select the startup item when starting up. Then you can install the win7 system smoothly with a compatible system disk. In addition: Reinstall the system. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
Hello! 1. The boot item of ESC can be selected. Generally, choose the USB disk startup item that does not start with UEFI; 2. BIOS, press F2 to enter BIOS-BOOT item-option #1 to select the first boot item. 3. If it still doesn't work, please tell the specific model of the machine to help you check whether other BIOS settings are needed.
There are several reasons for the infinite restart of the ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the computer to see if it can be repaired. Repeat.
OKX Wallet-APP, download it now, new users will receive a novice gift pack.
1. Solution steps: enter the system with PE. Display the hidden partition. Open the software Diskgenius, right-click on the hidden partition - cancel the hidden partition, add the drive letter - submit. Display hidden files.
2. There are several reasons for the infinite restart of ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the calculation. The machine will see if it can be repaired.
3Judging from the description of the problem, it should be a system problem. It is recommended to send the whole computer to the official after-sales service center of ASUS for comprehensive inspection by professional maintenance engineers to confirm the fault and necessary maintenance.
1, causing insufficient power supply, or leakage in the electrolytic capacitor at the output end, which will cause insufficient power supply when starting up, resulting in automatic restart of the computer, processing Method: Repair the host power supply or replace the power supply.
2. Use the system repair tool: In Windows 10, you can use the system repair tool to repair damaged system files. You can choose from the Windows 10 boot menu.Select "Troubleshooting", "Advanced Options" and "Command Prompt", and then enter the sfc /scannow command to start the system file check and repair tool.
3. Make sure that the hardware equipment of the computer is stablely connected, including memory, hard disk, graphics card, etc. All devices have been connected stably. You can plug and unplug the device again and restart the computer. When the computer starts, press the F8 key to enter the safe mode. In safe mode, disable unnecessary startup items and restart the computer.
The reason why the computer reinstall system has been restarting is that in the process of reinstalling the system with a USB flash drive, the main boot record (MBR) of the hard disk is destroyed, resulting in the inability to boot the system and repeated restarts.Due to the different hard disk mode, the system cannot be booted, resulting in repeated restarts.
It may be a problem with the setting of the BIOS. Enter the BIOS to restore the default settings or take out the battery of the motherboard and wait 5 minutes before installing it. Purpose: It is to restore the default value of BIOS settings and eliminate the phenomenon of automatic restart or shutdown of the heat dissipation preset of BIOS.
It is likely that the master boot record (MBR) of the hard disk is destroyed in the process of reinstalling the system with a USB flash drive, resulting in the inability to boot the system and repeated restarts.
What are the reasons for the automatic restart of the computer? How to prevent and control? In terms of software, the virus will also prompt the system to start automatically after 60 seconds when the shock wave virus attacks. The Trojan horse program remotely controls all the activities of your computer, including restarting your computer.Solution: Remove viruses, Trojan horses, or reinstall the system.
If the computer keeps restarting after restoring the factory settings, or cannot enter the safe mode by pressing the F8 key, here are some possible solutions: Check the startup order: enter the BIOS setting interface of the computer (usually press Del, FF12 and other keys to enter) and confirm the startup order. The order setting is correct.
Solving ideas: This problem occurs because the computer has its own genuine system, and there is a hidden partition on the computer's hard disk to save the system backup. When we activate Windows with the activation tool, the activation tool will write the "bootmgr" file in the system disk and hidden partition.
After restarting the computer, it can be used normally. My solution: Then enter the password interface and click the third icon in the lower right corner, select the high contrast, and then enter the password to enter the win10 system desktop.
In the process of installing the official version of Win10, when there is a blue screen and an infinite restart failure, we first need to disable the "graphics card driver".When the computer restarts indefinitely, press and hold the power button to force the shutdown, and then turn it on again to automatically enter the repair state.
Press the "F10" key and press the Enter key to confirm and save the BIOS configuration. Finally, you need to restart the computer.
Turn off the power first, then open the host box, unplug the power cable and data cable of the hard disk, and then plug it in after 2 minutes. Restart it and try to repair the operating system. Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, Press the power button for a long time after seeing the power-on screen.
There may be a problem with the system installation. You can replace the system to install the USB flash drive and try to reinstall the system.
Set it to "Enabled". Click F10 to save the settings, restart the system, and click ESC to select the startup item when starting up. Then you can install the win7 system smoothly with a compatible system disk. In addition: Reinstall the system. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
Hello! 1. The boot item of ESC can be selected. Generally, choose the USB disk startup item that does not start with UEFI; 2. BIOS, press F2 to enter BIOS-BOOT item-option #1 to select the first boot item. 3. If it still doesn't work, please tell the specific model of the machine to help you check whether other BIOS settings are needed.
There are several reasons for the infinite restart of the ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the computer to see if it can be repaired. Repeat.
OKX Wallet apk download latest version
author: 2025-01-23 03:47633.25MB
Check392.71MB
Check717.15MB
Check793.97MB
Check394.53MB
Check546.62MB
Check438.79MB
Check878.41MB
Check111.81MB
Check275.78MB
Check535.23MB
Check932.91MB
Check718.85MB
Check327.65MB
Check973.59MB
Check159.75MB
Check789.88MB
Check166.58MB
Check577.33MB
Check474.64MB
Check162.16MB
Check924.18MB
Check812.56MB
Check993.89MB
Check894.47MB
Check513.15MB
Check532.97MB
Check515.91MB
Check555.13MB
Check288.83MB
Check233.35MB
Check124.59MB
Check872.96MB
Check225.82MB
Check896.19MB
Check516.63MB
CheckScan to install
OKX Wallet to discover more
Netizen comments More
1041 情急智生网
2025-01-23 03:22 recommend
1223 色胆迷天网
2025-01-23 03:15 recommend
259 丁一确二网
2025-01-23 03:14 recommend
1263 苦海茫茫网
2025-01-23 02:25 recommend
2415 楚歌之计网
2025-01-23 02:16 recommend